# TNG(not TNGLive): The buffer is detected, but I receive no call details via serial cable

**URL:** <https://discourse.datatex.co.za/t/tng-not-tnglive-the-buffer-is-detected-but-i-receive-no-call-details-via-serial-cable/391>\
**Category:** Telephone Management ( TNG and TES )\
**Created:** [December 12, 2023, 3:05pm UTC](https://discourse.datatex.co.za/t/tng-not-tnglive-the-buffer-is-detected-but-i-receive-no-call-details-via-serial-cable/391 "2023-12-12T15:05:42Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![BelindaFrick](https://discourse.datatex.co.za/letter_avatar_proxy/v4/letter/b/94ad74/32.png) [@BelindaFrick](https://discourse.datatex.co.za/u/BelindaFrick)\
**Post date:** [December 12, 2023, 3:05pm UTC](https://discourse.datatex.co.za/t/tng-not-tnglive-the-buffer-is-detected-but-i-receive-no-call-details-via-serial-cable/391/1 "2023-12-12T15:05:42Z")

</div>

- To ensure call details are received outside TNG, first test from the buffer:

- Stop TNG service.

- Connect to the buffer using putty or hyperterminal.

- If you get output for ‘SYS’ or ‘REV’, then the buffer is working.

- TNG prompt the buffer for call details; therefore it should be set AUTO DUMP disabled.

- Confirm on the ‘SYS’ output if AUTO DUMP is disabled.

- If not, the command is ‘SAD 0’.

- Now you can type ‘S’ and enter to receive 1 string of call details.

- If there are any corrupt data, press ‘S’ until no more received.

- If still no call details, make an answered test call with a duration and after call termination - press ‘S’.
